High-capacity 2V1200AH Sealed Gel Lead Acid Battery

1. Charging efficiency: The usage of imported low resistance raw materials and advanced process help make theinternal resistance smaller and the acceptance ability of small current charging stronger. 2. High and low temperature tolerance: Wide temperature range (lead-acid:-25-50 C ,and gel:-35-60 C), suitablefor indoor and outdoor use in varies environments. 3. Long cycle-life: The design life of lead acid and gel series reach to more than 15 and 18 years respectively, forthe arid is corrosion- resistant. and electrolvte is without risk of stratification by using multiple rare-earth alloy ofindependent intellectual property rights, nanoscale fumed silica imported from Germany as base materials, andelectrolyte of nanometer colloid all by independent research and development. 4. Environment-friendly: Cadmium (Cd), which is poisonous and not easy to recycle, does not exist. Acid leakageof gel electrolvte will not happen. The battery operates in safety and environmental protection. 5. Recovery performance: The adoption of special alloys and lead paste formulations make a low self-dischargerate, good deep discharge tolerance, and strong recover capability.

Model	Voltage	Capacity	Weight	Size
DKGB2-100	2v	100Ah	5.3kg	17171205*205mm
DKGB2-200	2v	200Ah	12.7kg	171110325*364mm
DKGB2-220	2v	220Ah	13.6kg	171110325*364mm
DKGB2-250	2v	250Ah	16.6kg	170150355*366mm
DKGB2-300	2v	300Ah	18.1kg	170150355*366mm
DKGB2-400	2v	400Ah	25.8kg	210171353*363mm
DKGB2-420	2v	420Ah	26.5kg	210171353*363mm
DKGB2-450	2v	450Ah	27.9kg	241172354*365mm
DKGB2-500	2v	500Ah	29.8kg	241172354*365mm
DKGB2-600	2v	600Ah	36.2kg	301175355*365mm
DKGB2-800	2v	800Ah	50.8kg	410175354*365mm
DKGB2-900	2v	900AH	55.6kg	474175351*365mm
DKGB2-1000	2v	1000Ah	59.4kg	474175351*365mm
DKGB2-1200	2v	1200Ah	59.5kg	474175351*365mm
DKGB2-1500	2v	1500Ah	96.8kg	400350348*382mm
DKGB2-1600	2v	1600Ah	101.6kg	400350348*382mm
DKGB2-2000	2v	2000Ah	120.8kg	490350345*382mm
DKGB2-2500	2v	2500Ah	147kg	710350345*382mm
DKGB2-3000	2v	3000Ah	185kg	710350345*382mm

Lead ingot raw materials

Polar plate process

Electrode welding

Assemble process

Sealing process

Filling process

Charging process

Storage and shipping

Composition and working principle of photovoltaic power generation system Photovoltaic power generation systems mainly include grid connected systems and off grid systems. As the name implies, grid connected systems transmit electric energy generated by photovoltaic systems to the national grid in a parallel manner. The grid connected systems are mainly composed of photovoltaic modules, inverters, distribution boxes and other accessories. The off grid systems operate independently and do not need to rely on the public grid. The off grid systems need to be equipped with batteries and solar controllers for energy storage, It can ensure the stability of the system power and supply power to the load when the photovoltaic system does not generate power or the power generation is insufficient in a continuous overcast day. In any form, the working principle is that photovoltaic modules convert light energy into direct current, and the direct current is converted into current under the effect of inverter, so as to finally realize the functions of electricity consumption and Internet access. 1. Photovoltaic module PV module is the core part of the whole power generation system, which is composed of PV module chips or PV modules of different specifications cut by laser cutting machine or wire cutting machine. Since the current and voltage of a single photovoltaic cell are very small, it is necessary to first obtain high voltage in series, then obtain high current in parallel, output it through a diode (to prevent current back transmission), and then package it on a stainless steel, aluminum or other non-metallic frame, install the glass on the top and the backplane on the back, fill it with nitrogen, and seal it. The PV modules are combined in series and parallel to form a PV module array, also known as a PV array. Working principle: the sun shines on the semiconductor p-n junction, forming a new hole electron pair. Under the effect of the electric field of the p-n junction, holes flow from the p area to the n area, and electrons flow from the n area to the p area. After the circuit is connected, a current is formed. Its function is to convert the solar energy into electric energy and send it to the storage battery for storage, or to drive the load to work. 2. Controller (for off grid system) Photovoltaic controller is an automatic control device that can automatically prevent battery overcharge and overdischarge. The high-speed CPU microprocessor and high-precision A/D converter are used as a microcomputer data acquisition and monitoring control system, which can not only quickly and timely collect the current working status of the photovoltaic system, obtain the working information of the PV station at any time, but also accumulate the historical data of the PV station in detail, providing an accurate and sufficient basis for evaluating the rationality of the PV system design and the reliability of the quality of the system components, and also has the function of serial communication data transmission, Multiple PV system substations can be centrally managed and remotely controlled. 3. Inverter The inverter is a device that converts the direct current generated by photovoltaic power generation into alternating current. The photovoltaic inverter is one of the important system balances in the photovoltaic array system and can be used with general AC powered equipment. The solar inverter has special functions to cooperate with the photovoltaic array, such as maximum power point tracking and island effect protection. 4. Battery (not required for grid connected system) Storage battery is a device for storing electricity in photovoltaic power generation system. At present, there are four kinds of lead-acid maintenance free batteries, ordinary lead-acid batteries, gel batteries and alkaline nickel cadmium batteries, and the widely used lead-acid maintenance free batteries and gel batteries. Working principle: the sunlight shines on the photovoltaic module in the daytime, generates DC voltage, converts the light energy into electrical energy, and then transmits it to the controller. After the controller's overcharge protection, the electrical energy transmitted from the photovoltaic module is transmitted to the battery for storage, for use when needed.